– Adhesion promoter for glass. Suitable for two-component acrylic and PU.
Add at the ratio of 5% to component A, then let it stand for 24 hours. After this time, the additive
has fully developed its efficiency and the product can then be normally applied (after addition of
hardener and thinner) on glass, thus achieving an excellent adhesion on this kind of substrate.
– The addition of AF—M919 does not affect pot-life, matt level, drying time, color and every other
properties of the coating.
– It is advisable to always perform preliminary tests in order to check if the superficial treatments of
the glass allow the coating.
-The adhesion of the glass can easily be affected by an incorrect cleaning of the glass. For this
reason, it is recommended to use the specific cleaner AG—M500.