FA
|
EN
PRODUCT CODE:YO XXM760/__XXX
BRAND:
MAIN PROPERTIES:
– Excellent hardness and touch feeling -Excellent sheen level uniformity
-Base for lacquered colours -High pigmenting properties
VERSION;
05M760/ XXX 5 gloss 10M760/ XXX 10 gloss 15M760/ XXX 15 gloss
30M760/ XXX 30 gloss 50M760/ XXX 50 gloss
RECOMMENDED USE:
-General purpose -Furniture -Doors
APPLICATION METODS:
Spray: conventional, airmix, airless, electrostatic gun (as long as with machines suitable for waterborne products).
PRODUCT PREPARATION:
Ready to use. If needed, thin with tap water.
CHEMICAL-PHYSICAL PROPERTIES(23 °C):
/–NTR /–SBN
Solids content (%) 31 ± 1 40 ±
Specific weight (g/cm3) 1,040 ± 0,030 1,150 ± 0,030
Viscosity with cup (s) DIN 8: 45 ± 3 DIN 6: 45 ± 5
pH 8 – 8,5
APPLICATION PROPERTIES:
Vertical hold ( wet μm) 140
Recommended N° of coats 1
Recommended quantity per coat min: 80 max: 150
Interval between coats
pH 8 – 8,5 Spreading rate (m2/litre) 6 – 11
SUBSTRATE PREPARATION:
Sand the substrate with 320 – 400 grit paper. YO-xxM760/ XXX can be applied on WB, PE or UV basecoats.Do not apply on nitro or PU basecoats.
PIGMENTABILITY:
Please refer to Aquaris interiors appl. formula book YO-760 for colours already formulated with 12% of waterbased pastes EY M460/xxx .
If necessary, YO-xxM760/–NTR can be pigmented up to a maximum of 18%. YO-xxM760/–SBN can be pigmented up to 4%. Read
the TDS of WB pastes for more technical information about covering properties, light resistance, etc
REMARKS:
By using YO-xxM760/–NTR, viscosity of the topcoat can vary according to the colour composition. Optimal viscosity for application is 45 seconds by using a Din 6 cup. This level of viscosity can be obtained by adding tap water or AY M453 under stirring.
APPLICATION ON GLASS:
topcoat YO-xxM760/XXX and colours derived from it can be used for coating glass if they are blended with crosslinker YCM419 at 2%. Add crosslinker under stirring (previously blended with tap water at 1:1). Use within 24-48 hours from
blending.
GENERAL REMARKS:
– Mix well before use.
– If properly stored at temperatures between 5 and 35°C, shelf life is 18 months.
-On application, the temperature of the product, the substrate, the coating and the working environment should never fall below
15°C. Coatings applied at lower temperatures will show chemical and mechanical properties lower than standard performances
that can be normally achieved.
– Coating left overs (washing waters, waters from spray booths, used coatings) must be disposed of according to local regulations.Never dispose of residues directly into drains.
-Application tools must be cleaned with water after use. When dry films must be removed, special detergent AY—M460 should be used, letting it work overnight and then cleansing with water
DOWNLOADS:
ORDER THIS PRODUCT:
کد محصول:YO XXM760/__XXX
برند:
دانلود:
سفارش این محصول:
RELATED PRODUCTS
© 2024 LIAN — ALL RIGHTS RESERVED
