FA
|
EN
PRODUCT CODE:AF—M919
MAIN PROPERTIES:
– Adhesion promoter for glass. Suitable for two-component acrylic and PU.
Add at the ratio of 5% to component A, then let it stand for 24 hours. After this time, the additive
has fully developed its efficiency and the product can then be normally applied (after addition of
hardener and thinner) on glass, thus achieving an excellent adhesion on this kind of substrate.
– The addition of AF—M919 does not affect pot-life, matt level, drying time, color and every other
properties of the coating.
– It is advisable to always perform preliminary tests in order to check if the superficial treatments of
the glass allow the coating.
-The adhesion of the glass can easily be affected by an incorrect cleaning of the glass. For this
reason, it is recommended to use the specific cleaner AG—M500.
RECOMMENDED USE:
Flat parts, both veneer and solid wood
APPLICATION METHOD:
By spray and curtain coater
PRODUCT PREPARATION:
by weight:
JO-xxM073 100
hardener FC—M070 10
thinner DF—M005 20
by volume :
same ratio as the procedure by weight
CHEMICAL-PHYSICAL CHARACTERISTICS:
Solid content (%) 26% ± 1
Specific weight (g/cm3) 0,935± 0,030
GENERAL REMARKS:
The product has unlimited shelf life. However, after prolonged storage, some settlement may occur. It is therefore advisable to homogenize well the product before using it.
DOWNLOADS:
ORDER THIS PRODUCT:
کد محصول:AF—M919
دانلود:
سفارش این محصول:
RELATED PRODUCTS
© 2024 LIAN — ALL RIGHTS RESERVED